| SAES-A-004 | General Requirements for Pressure Testing |
| SAES-A-005 | Safety Instruction Sheet |
| SAES-A-007 | Hydrostatic Testing Fluids and Lay-Up Procedures |
| SAES-A-020 | Equipment Specific P & ID Templates (ESPT) |
| SAES-A-100 | Survey Coordinates, Datum’s and Data Formats |
| SAES-A-102 | Ambient Air Quality and Source Emissions Standards |
| SAES-A-103 | Discharges to the Marine Environment |
| SAES-A-104 | Wastewater Treatment, Reuse and Disposal |
| SAES-A-105 | Noise Control |
| SAES-A-109 | Site Planning for Prayer Shelters |
| SAES-A-111 | Borrow Pit Requirements |
| SAES-A-112 | Meteorological and Seismic Design Data |
| SAES-A-113 | Geotechnical Engineering Requirements |
| SAES-A-114 | Excavation and Backfill |
| SAES-A-115 | Groundwater Monitoring Well Design, Installation, and Decommissioning |
| SAES-A-202 | Saudi Aramco Engineering Drawing Preparation |
| SAES-A-204 | Preparation of Structural Calculations |
| SAES-A-205 | Oilfield Chemicals |
| SAES-A-206 | Positive Material Identification |
| SAES-A-207 | Catalyst and Desiccant Selection |
| SAES-A-208 | Water Treatment Chemicals |
| SAES-A-210 | Management of Pyrophoric Wastes |
| SAES-A-302 | Aviation Fuel Quality assurance Design Requirement |
| SAES-A-400 | Industrial Drainage Systems |
| SAES-A-401 | Closed Drain Systems (CDS) |
| SAES-A-403 | Offshore Platform Drainage Design |
| SAES-B-005 | Spacing and Diking for Atmospheric and Low-Pressure Tanks |
| SAES-B-006 | Fireproofing for Plants |
| SAES-B-008 | Restrictions to Use of Cellars, Pits and Trenches |
| SAES-B-009 | Fire Protection and Safety Requirements of Offshore Production Facilities |
| SAES-B-014 | Safety Requirements for Plants and Operations Support Buildings |
| SAES-B-017 | Fire Water System Design |
| SAES-B-018 | Foam Systems |
| SAES-B-019 | Portable, Mobile and Special Fixed Firefighting Equipment |
| SAES-B-053 | Machine Safety Guarding, Elevators, Escalators and Conveyors |
| SAES-B-054 | Access Egress, and Materials Handling for Plant Facilities |
| SAES-B-055 | Plant Layout |
| SAES-B-057 | Safety Requirements: Refrigerated and Pressure Storage Tanks and Vessels |
| SAES-B-058 | Emergency Shutdown, Isolation, and Depressuring |
| SAES-B-060 | Fire Protection for Piers, Wharves and Sea Islands |
| SAES-B-061 | Protective Shield for High Health Hazard Piping and Equipment |
| SAES-B-062 | Onshore Well-site Safety |
| SAES-B-063 | Aviation Obstruction Marking and Lighting |
| SAES-B-064 | Onshore and Near-shore Piping Safety |
| SAES-B-067 | Safety Identification and Safety Colors |
| SAES-B-068 | Electrical Area Classification |
| SAES-B-069 | Emergency Eyewashes and Showers |
| SAES-B-070 | Fire and Safety Requirements for Bulk Plants, Air Fueling Terminals and Sulfur Handling Facilities |
| SAES-B-071 | Community And Facility Wide-Area Alerting Systems |
| SAES-C-001 | Process Design of Trays and Packing |
| SAES-D-001 | Design Criteria for Pressure Vessels |
| SAES-D-008 | Repair, Alteration, and Rerating of Process Equipment |
| SAES-D-100 | Design Criteria for Atmospheric and Low-Pressure Tanks |
| SAES-D-101 | Regulated Vendors List Managed Commodities for Pressure Vessels and Storage Tanks |
| SAES-D-108 | Repair, Alteration, and Reconstruction of Storage Tanks |
| SAES-D-109 | Design of Small Metallic Storage Tanks |
| SAES-D-110 | Design of Fiberglass-Reinforced Plastic (FRP) Storage Tanks |
| SAES-D-116 | Underground Storage Tank System |
| SAES-E-004 | Design Criteria of Shell and Tube Heat Exchangers |
| SAES-E-006 | Design Criteria of Double Pipe Heat Exchangers |
| SAES-E-007 | Design Criteria of Air-Cooled Heat Exchangers |
| SAES-E-014 | Design Criteria of Plate and Frame Heat Exchangers |
| SAES-E-015 | Design Criteria of Electric Heat Exchangers |
| SAES-E-101 | Regulated Vendors List for Heat Transfer Equipment |
| SAES-F-001 | Design Criteria for Fired Heaters |
| SAES-F-007 | System Design Criteria of Flares |
| SAES-G-005 | Centrifugal Pumps |
| SAES-G-006 | Positive Displacement Pumps- Controlled Volume |
| SAES-G-007 | Submersible Pumps and Motors for Water Well and Offshore Service |
| SAES-G-101 | Regulated Vendors List for Pumps and Mechanical Seals |
| SAES-G-115 | Lubrication, Shafting Sealing and Control Oil Systems |
| SAES-G-116 | Cleanliness Standard for Lube/Seal Oil and Fluid Power Systems |
| SAES-H-001 | Coating Selection and Application Requirements for Industrial Plants and Equipment |
| SAES-H-002 | Internal and External Coatings for Steel Pipeline and Piping |
| SAES-H-002V | Approved Saudi Aramco Data Sheets for the Pipeline and Piping Coatings |
| SAES-H-003 | Protective Coatings for Industrial Concrete Structures |
| SAES-H-004 | Protective Coating Selection and Application Requirements for Offshore Structures and Facilities |
| SAES-H-101V | Approved Saudi Aramco Data Sheets- Paints and Coatings |
| SAES-H-102 | Safety Requirements for Coating Applications |
| SAES-H-200 | Storage, Handling and Installation of Externally Coated Pipe |
| SAES-H-201 | General Specifications for Over-the-Ditch External and Internal FBE Coating of Field Girth Welds |
| SAES-H-204 | General Specifications and Application Procedures of Heat-Shrink Sleeves to Coated Pipe |
| SAES-I-001 | ESP System- Design and Procurement |
| SAES-I-002 | ESP System- Supplier Integration |
| SAES-J-001 | Instrumentation Index |
| SAES-J-002 | Technically Acceptable Instrument Manufacturers |
| SAES-J-003 | Instrumentation- Basic Design Criteria |
| SAES-J-004 | Instrumentation Symbols and Identification |
| SAES-J-005 | Instrumentation Drawings and Forms |
| SAES-J-100 | Process Flow Metering |
| SAES-J-200 | Pressure |
| SAES-J-300 | Level |
| SAES-J-400 | Temperature |
| SAES-J-502 | Analyzer Shelters |
| SAES-J-504 | Sample Conditioning Systems for Process Analyzers |
| SAES-J-505 | Combustible Gas and Hydrogen Sulfide in Air Detection Systems |
| SAES-J-600 | Pressure Relief Devices |
| SAES-J-601 | Emergency Shutdown and Isolation Systems |
| SAES-J-602 | Burner Management, Combustion and Waterside Control Systems for Watertube Boilers |
| SAES-J-603 | Process Heaters Safety Systems |
| SAES-J-604 | Protective and Condition Monitoring Equipment for Rotating Machinery |
| SAES-J-605 | Surge Relief Protection Systems |
| SAES-J-607 | Burner Management Systems for SRU Trains |
| SAES-J-700 | Control Valves |
| SAES-J-801 | Control Buildings |
| SAES-J-901 | Instrument Air Supply Systems |
| SAES-J-902 | Electrical Systems for Instrumentation |
| SAES-J-903 | Intrinsically Safe Systems |
| SAES-K-001 | Design and Installation of Heating, Ventilating and Air Conditioning Systems |
| SAES-K-002 | Air Conditioning Systems for Essential Operating Facilities |
| SAES-K-003 | HVAC Systems for Communications Facilities and Data Centers |
| SAES-K-011 | Building Management System |
| SAES-K-100 | Saudi Aramco Mechanical HVAC Code |
| SAES-K-101 | Regulated Vendors List for Heating, Ventilating and Air Conditioning (HVAC) Equipment |
| SAES-K-110 | Regulated Vendors List for Compressors, Expanders, Gears and Steam Turbines |
| SAES-K-115 | Regulated Vendors List for Combustion Gas Turbines |
| SAES-K-400 | Basic Selection of Compressors |
| SAES-K-402 | Centrifugal Compressors |
| SAES-K-403 | Reciprocating Compressors |
| SAES-K-501 | Steam Turbines |
| SAES-K-502 | Combustion Gas Turbines |
| SAES-K-511 | Diesel Engines |
| SAES-K-600 | Side-Entry Mixers |
| SAES-L-100 | Applicable Codes and Standards for Pressure Piping Systems |
| SAES-L-101 | Regulated Vendors List for Pipes, Fittings, Flanges and Tubes |
| SAES-L-102 | Regulated Vendors List for Valves |
| SAES-L-105 | Piping Material Specifications |
| SAES-L-108 | Selection of Valves |
| SAES-L-109 | Selection of Flanges, Stud Bolts and Gaskets |
| SAES-L-110 | Limitations of Pipe Joints and Components |
| SAES-L-120 | Piping Flexibility Analysis |
| SAES-L-125 | Safety Instruction Sheet for Piping and Pipelines |
| SAES-L-131 | Fracture Control of Line Pipe |
| SAES-L-132 | Material Selection for Piping Systems |
| SAES-L-133 | Corrosion Protection Requirements for Pipelines, Piping and Process Equipment |
| SAES-L-136 | Pipe, Flange and Fitting Material Requirements |
| SAES-L-140 | Thermal Expansion Relief in Piping |
| SAES-L-150 | Pressure Testing of Plant Piping and Pipelines |
| SAES-L-310 | Design of Plant Piping |
| SAES-L-350 | Construction of Plant Piping |
| SAES-L-410 | Design of Pipelines |
| SAES-L-420 | Scraper Tray Station and Appurtenances |
| SAES-L-440 | Anchors for Buried Pipelines |
| SAES-L-450 | Construction of On-Land and Near-Shore Pipelines |
| SAES-L-460 | Pipeline Crossings Under Roads and Railroads |
| SAES-L-470 | Trenchless Pipelines Construction Requirements |
| SAES-L-610 | Nonmetallic Piping in Oily Water Services |
| SAES-L-620 | Design of Nonmetallic Piping in Hydrocarbon and Water Injection Systems |
| SAES-L-650 | Construction of Nonmetallic Piping in Hydrocarbon and Water Injection Systems |
| SAES-L-810 | Design of Piping on Offshore Structures |
| SAES-L-850 | Design of Submarine Pipelines and Risers |
| SAES-M-001 | Structural Design Criteria for Non-Building Structures |
| SAES-M-005 | Design and Construction of Fixed Offshore Platforms |
| SAES-M-006 | Saudi Aramco Security and General Purpose Fencing |
| SAES-M-009 | Design Criteria for Blast Resistant Buildings |
| SAES-M-100 | Saudi Aramco Building Code |
| SAES-N-001 | Basic Criteria, Industrial Insulation |
| SAES-N-004 | Design and Installation of Building Thermal Insulation |
| SAES-N-100 | Refractory Systems |
| SAES-N-110 | Installation Requirements- Castable Refractories |
| SAES-N-120 | Installation Requirements- Extreme Erosion Resistance Refractories |
| SAES-N-130 | Installation Requirements- Refractory Bricks |
| SAES-N-140 | Installation Requirements- Refractory Ceramic Fiber |
| SAES-O-201 | Application of Security Directives |
| SAES-O-202 | Security Fencing |
| SAES-O-203 | Security Gate |
| SAES-O-204 | Security Lighting |
| SAES-O-205 | Integrated Security System |
| SAES-O-206 | Security Devices |
| SAES-O-207 | Power Supply for Security Systems |
| SAES-O-208 | Communications for Security Systems |
| SAES-O-209 | Security Doors |
| SAES-O-210 | Security Locks |
| SAES-O-211 | Identification Cards |
| SAES-O-212 | Security Information Protection |
| SAES-P-100 | Basic Power System Design Criteria |
| SAES-P-101 | Regulated Vendors List for Electrical Equipment |
| SAES-P-103 | UPS and DC Systems |
| SAES-P-104 | Wiring Methods and Materials |
| SAES-P-107 | Overhead Distribution Systems |
| SAES-P-111 | Grounding |
| SAES-P-113 | Motors and Generators |
| SAES-P-114 | Power System Protection and Control |
| SAES-P-116 | Switchgear and Control Equipment |
| SAES-P-119 | Substations |
| SAES-P-121 | Transformers and Reactors |
| SAES-P-123 | Lighting |
| SAES-P-126 | Power System Automation |
| SAES-Q-001 | Criteria for Design and Construction of Concrete Structures |
| SAES-Q-004 | Installation of Piles and Conductors for Offshore Structures |
| SAES-Q-005 | Concrete Foundations |
| SAES-Q-006 | Asphalt Concrete Paving |
| SAES-Q-007 | Foundations and Supporting Structures for Heavy Machinery |
| SAES-Q-009 | Concrete Retaining Walls |
| SAES-Q-010 | Cement Based, Non-Shrink Grout for Structural and Equipment Grouting |
| SAES-Q-011 | Epoxy Grout for Machinery Support |
| SAES-Q-012 | Criteria for Design and Construction of Precast and Prestressed Concrete Structures |
| SAES-R-004 | Building Architectural Design and Finishes Requirements |
| SAES-S-007 | Solid Waste Landfill Requirements |
| SAES-S-010 | Sanitary Sewers |
| SAES-S-020 | Oily Water Drainage Systems |
| SAES-S-030 | Storm Water Drainage Systems |
| SAES-S-040 | Saudi Aramco Water Systems |
| SAES-S-050 | Sprinkler and Standpipe Systems in Buildings |
| SAES-S-060 | Saudi Aramco Plumbing Code |
| SAES-S-070 | Installation of Utility Piping Systems |
| SAES-T-000 | Telecommunications Standards- Introductions and Indices |
| SAES-T-018 | Telecommunications- Symbols, Abbreviations and Definitions |
| SAES-T-101 | Regulated Vendors List for Communications Equipment and Materials |
| SAES-T-151 | D.C. Power Systems |
| SAES-T-360 | Synchronous Digital Hierarchy Transmission Systems |
| SAES-T-481 | In-Plant Voice Paging System |
| SAES-T-492 | VHF/UHF Land-Mobile and Fixed Radio Communication |
| SAES-T-493 | Digital Trunked Radio System |
| SAES-T-494 | Very Small Aperture Terminal (VSAT) Network Design |
| SAES-T-500 | Central Office (CO) Digital Telephone Switching Systems |
| SAES-T-521 | Circuit Measuring Techniques |
| SAES-T-555 | IP Based Closed-Circuit Television (CCTV) |
| SAES-T-556 | Circuit Quality and Performance |
| SAES-T-570 | Design Residential Telecommunications Infrastructure |
| SAES-T-603 | Telecommunications- Safeguards and Warning Devices |
| SAES-T-624 | Telecommunications Outside Plant- Fiber Optics |
| SAES-T-625 | Inter and Intra Building Fiber Optic Communication Cables |
| SAES-T-628 | Telecommunications- Underground Cable |
| SAES-T-629 | Telecommunications- Buried Cable and Wire |
| SAES-T-631 | Communications Cable Terminals |
| SAES-T-632 | Communications Cable Splicing |
| SAES-T-633 | Communications Splice Closures |
| SAES-T-634 | Telecommunications – Cable Testing and Acceptance |
| SAES-T-637 | Communications Cable Pressure Testing |
| SAES-T-744 | Design Criteria and Installation of Communication Towers |
| SAES-T-795 | Communications Facility Grounding Systems |
| SAES-T-820 | Narrow-Band Video Conferencing Systems |
| SAES-T-830 | Voice Frequency Loop Transmission Objectives |
| SAES-T-883 | Telecommunications – Inductive Coordination |
| SAES-T-887 | Telecommunications: Electrical Coordination- Protection at Power Plants and Radio Stations |
| SAES-T-903 | Outside Plant Electrical Protection and Grounding |
| SAES-T-906 | Telecommunications – Structural Coordination |
| SAES-T-911 | Telecommunication Conduit System Design |
| SAES-T-912 | Communications Feeder Cable |
| SAES-T-914 | Communications Distribution Cable |
| SAES-T-916 | Communications Building Cable |
| SAES-T-919 | Submarine Fiber Optic Cable |
| SAES-T-920 | Telecommunications Cable Information |
| SAES-T-928 | Telecommunications – OSP Buried Plant |
| SAES-T-938 | Telecommunications: Outside Plant Systems- Design |
| SAES-W-010 | Welding Requirements for Pressure Vessels |
| SAES-W-011 | Welding Requirements for On-Plot Piping |
| SAES-W-012 | Welding Requirements for Pipelines |
| SAES-W-013 | Welding Requirements for Offshore Structures |
| SAES-W-014 | Weld Overlays and Welding of Clad Materials |
| SAES-W-015 | Strip Lining Application |
| SAES-W-016 | Welding of Special Corrosion-Resistant Materials |
| SAES-W-017 | Welding Requirements for API Tanks |
| SAES-W-019 | Girth Welding Requirements for Clad Pipes |
| SAES-X-300 | Cathodic Protection of Marine Structures |
| SAES-X-400 | Cathodic Protection of Buried Pipelines |
| SAES-X-500 | Cathodic Protection of Vessel and Tank Internals |
| SAES-X-600 | Cathodic Protection of Plant Facilities |
| SAES-X-700 | Cathodic Protection of Onshore Well Casings |
| SAES-X-800 | Cathodic Protection for Existing Reinforced Concrete Structures |
| SAES-Y-100 | Regulated Vendors List for Royalty/Custody Measurement Equipment |
| SAES-Y-101 | Custody Metering of Hydrocarbon Gases |
| SAES-Y-103 | Royalty/Custody Metering of Hydrocarbon Liquids |
| SAES-Y-301 | Royalty/Custody Measurement of Hydrocarbon Liquids using Radar Tank Gauging System |
| SAES-Y-501 | Dynamic Sampling of Hydrocarbon Liquids for Royal/Custody Transfers |
| SAES-Z-000 | Process Control Standards Index |
| SAES-Z-001 | Process Control Systems |
| SAES-Z-002 | Regulated Vendors List for Process Automation Systems |
| SAES-Z-003 | Pipelines Leak Detection Systems |
| SAES-Z-004 | Supervisory Control and Data Acquisition (SCADA) System |
| SAES-Z-010 | Process Automation Networks |
| SAES-Z-020 | Design and Installation of Fiber Optic Cable Systems for Process Control Networks |
