Answers
1. a. Cold Work permit.
2. c. To explain reasons for locking out equipment.
3. a. All Saudi Aramco areas.
4. a. The issuer and receiver.
5. a. The new on-coming issuer and receiver agree on conditions and sign the permit to extend it.
6. d. Never.
7. d. Craftsmen, or others, who have been certified to receive work permits.
8. a. The receiver is not allowed to leave the job site under any circumstances.
9. a. Excavations.
10. c. Hot Work.
11. c. Flammable gases may be blown towards an ignition source.
12. b. Posted or readily available at the job site.
13. a. Only cold work can be performed.
14. b. More than 10 ppm.
15. a. Only one.
16. a. 21%
17. b. Identify hazards and determine precautions.
18. a. No, only the issuer is allowed to lock out equipment.
19. d. The operations and maintenance division heads
20. c. Conducted a joint site inspection.
21. b. Additional precautions.
22. c. Hydrogen sulfide poisoning.
23. c. Confined Space Entry.
24. a. Stop work, get out of the area and notify the issuer.
25. a. Each craft must have its own permit.
26. d. The certified operation’s supervisor.
27. c. Release of Hazardous Liquids or Gases Work permit.
28. c. The new on-coming issuer and receiver agree on conditions and sign the permit to extend it.
29. a. When the issuer has given permission in advance.
30. d. All Saudi Aramco areas.
31. a. By the permit issuer and receiver.
32. b. Because all confined spaces have toxic gases.
33. d. To provide a safe work place.
34. d. Notify his supervisor.
35. d. Agrees with all conditions stated on the work permit.
36. c. Stop the job and inform the issuer.
37. d. Safety glasses/face shield combination.
38. a. 110V.
39. b. 50 ft.
40. d. 4 to 1.
41. b. 4 feet.
42. a. GI 1.200.
43. b. 24 hours.
44. c. 6 ft.
45. d. 2 ft.
46. c. 15.
47. a. 20 ft.
48. a. A fire involving ordinary combustibles.
49. c. Type C.
50. d. Installation of a anti-two block device.
