Index SAES | Excel | Saudi Aramco Engineering Standards

INDEX OF ACTIVE SAES

SAES-A-004 : General Requirements for Pressure Testing
SAES-A-005 : Safety Instruction Sheet
SAES-A-007 : Hydrostatic Testing Fluids and Lay-Up Procedures
SAES-A-100 : Survey Coordinates and Datums
SAES-A-102 : Air Pollutant Emission Source Control
SAES-A-103 : Discharges to the Marine Environment
SAES-A-104 : Wastewater Treatment, Reuse and Disposal
SAES-A-105 : Noise Control
SAES-A-109 : Site Planning for Prayer Shelters
SAES-A-111 : Borrow Pit Requirements
SAES-A-112 : Meteorological and Seismic Design Data
SAES-A-113 : Geotechnical Engineering Requirements
SAES-A-114 : Excavation and Backfill
SAES-A-202 : Saudi Aramco Engineering Drawing Preparation
SAES-A-204 : Preparation of Structural Calculations
SAES-A-205 : Oilfield Chemicals
SAES-A-206 : Positive Material Identification
SAES-A-207 : Catalyst and Desiccant Selection and Replacement
SAES-A-208 : Water Treatment Chemicals
SAES-A-300 : Regulated Vendors List for Drilling Wellhead and Valves
SAES-A-301 : Materials Resistant to Sulfide Stress Corrosion Cracking
SAES-B-005 : Spacing and Diking for Atmospheric and Low-Pressure Tanks
SAES-B-006 : Fireproofing for Plants
SAES-B-008 : Restrictions to Use of Cellars, Pits, and Trenches
SAES-B-009 : Fire Protection and Safety Requirements for Offshore Production Facilities
SAES-B-014 : Safety Requirements for Plant and Operations Support Buildings
SAES-B-017 : Fire Water System Design
SAES-B-018 : Air Foam Systems for Storage Tanks
SAES-B-019 : Portable, Mobile and Special Fixed Firefighting Equipment
SAES-B-053 : Machine Safety Guarding, Elevators, Escalators and Conveyors
SAES-B-054 : Access, Egress, and Materials Handling for Plant Facilities
SAES-B-055 : Plant Layout
SAES-B-057 : Safety Requirements: Refrigerated and Pressure Storage Tanks and Vessels
SAES-B-058 : Emergency Shutdown, Isolation and Depressuring
SAES-B-060 : Fire Protection for Piers, Wharves and Sea Islands
SAES-B-061 : Protective Shields for High Health Hazard Piping and Equipment
SAES-B-062 : Onshore Wellsite Safety
SAES-B-063 : Aviation Obstruction Marking and Lighting
SAES-B-064 : Onshore and Nearshore Pipeline Safety
SAES-B-067 : Safety Identification and Safety Colors
SAES-B-068 : Electrical Area Classification
SAES-B-069 : Emergency Eyewashes and Showers
SAES-B-070 : Fire and Safety Requirements for Bulk Plants, Air Fueling and Sulfur Loading Facilities
SAES-C-001 : Process Design of Trays and Packing
SAES-D-001 : Design Criteria for Pressure Vessels
SAES-D-008 : Repairs, Alterations, and Re-rating of Process Equipment
SAES-D-100 : Design Criteria of Atmospheric and Low-Pressure Tanks
SAES-D-101 : Regulated Vendors List for Pressure Vessels and Tanks
SAES-D-108 : Repair, Alteration and Reconstruction of Storage Tanks
SAES-D-109 : Design of Small Tanks
SAES-E-004 : Design Criteria of Shell and Tube Heat Exchangers
SAES-E-006 : Design Criteria of Double Pipe Heat Exchangers
SAES-E-007 : Design Criteria of Air-Cooled Heat Exchangers
SAES-E-014 : Design Criteria of Plate and Frame Heat Exchangers
SAES-E-015 : Design Criteria of Electric Heat Exchangers
SAES-E-101 : Regulated Vendors List for Heat Transfer Equipment
SAES-F-001 : Design Criteria of Fired Heaters
SAES-F-007 : System Design Criteria of Flares

Download SAES Index xlsx file below

SAES-G-005 : Centrifugal Pumps
SAES-G-006 : Positive Displacement Pumps – Controlled Volume
SAES-G-007 : Submersible Pumps and Motors for Water Well and Offshore Service
SAES-G-101 : Regulated Vendors List for Pumps and Mechanical Seals
SAES-G-115 : Lubrication, Shaft Sealing and Control Oil Systems
SAES-G-116 : Cleanliness Standard for Lube/Seal Oil and Fluid Power Systems
SAES-H-001 : Coating Selection & Application Requirements for Industrial Plants & Equipment
SAES-H-002 : Internal and External Coatings for Steel Pipelines and Piping
SAES-H-002V : Approved Saudi Aramco Data Sheets for the Pipeline Maintenance External Coatings
SAES-H-003 : Protective Coatings for Industrial Concrete Structures
SAES-H-100 : Coating Materials & Application Requirements for Industrial Facilities
SAES-H-101 : Approved Protective Coating Systems for Industrial Plants & Equipment
SAES-H-101V : Approved Saudi Aramco Data Sheets – Paints and Coatings
SAES-H-102 : Safety Requirements for Coating Applications
SAES-H-200 : Storage, Handling and Installation of Pipe Externally Coated Pipe
SAES-H-201 : General Specification for Over-the-Ditch External FBE Coating of Field Girth Welds
SAES-H-204 : General Specification for Applications Procedures of Heat-Shrink Sleeves to Coated Pipe
SAES-J-001 : Instrumentation Index
SAES-J-002 : Regulated Vendors List for Instruments
SAES-J-003 : Instrumentation – Basic Design Criteria
SAES-J-004 : Instrumentation Symbols and Identification
SAES-J-005 : Instrumentation Drawings and Forms
SAES-J-100 : Process Flow Metering
SAES-J-200 : Pressure
SAES-J-300 : Level
SAES-J-400 : Temperature
SAES-J-502 : Analyzer Shelters
SAES-J-505 : Combustible Gas and Hydrogen Sulfide in Air Detection Systems
SAES-J-600 : Pressure Relief Devices
SAES-J-601 : Emergency Shutdown and Isolation Systems
SAES-J-602 : Burner Management, Combustion and Waterside Control Systems for Watertube Boilers
SAES-J-603 : Process Heaters Safety Systems
SAES-J-604 : Protective and Condition Monitoring Equipment for Rotating Machinery
SAES-J-605 : Surge Relief Protection Systems
SAES-J-607 : Burner Management Systems for SRU Trains
SAES-J-700 : Control Valves
SAES-J-801 : Control Buildings
SAES-J-901 : Instrument Air Supply Systems
SAES-J-902 : Electrical Systems for Instrumentation
SAES-J-903 : Intrinsically Safe Systems
SAES-J-904 : FOUNDATION™ Fieldbus (FF) Systems
SAES-K-001 : Heating, Ventilating and Air Conditioning (HVAC)
SAES-K-002 : Air Conditioning Systems for Essential Operating Facilities
SAES-K-003 : Air Conditioning Systems for Communications Buildings
SAES-K-100 : Saudi Aramco Mechanical (HVAC) Code
SAES-K-115 : Regulated Vendors List for Combustion Gas Turbines
SAES-K-120 : Regulated Vendors List for Compressors, Expanders, Gears and Steam Turbines
SAES-K-402 : Centrifugal Compressors
SAES-K-403 : Reciprocating Compressors
SAES-K-501 : Steam Turbines
SAES-K-502 : Combustion Gas Turbines
SAES-K-511 : Diesel Engines
SAES-K-600 : Side-Entry Mixers
SAES-L-052 : Hot Tap Connections
SAES-L-100 : Applicable Codes and Standards for Pressure Piping Systems
SAES-L-101 : Regulated Vendors List for Pipes, Fittings and Gaskets
SAES-L-102 : Regulated Vendors List for Valves
SAES-L-105 : Piping Material Specifications
SAES-L-108 : Selection of Valves
SAES-L-109 : Selection of Flanges, Stud Bolts and Gaskets
SAES-L-110 : Limitations on Pipe Joints and Components
SAES-L-120 : Piping Flexibility Analysis
SAES-L-125 : Safety Instruction Sheet for Piping and Pipelines
SAES-L-130 : Material for Low Temperature Service
SAES-L-131 : Fracture Control of Line Pipe
SAES-L-132 : Material Selection for Piping Systems
SAES-L-133 : Corrosion Protection Requirements for Pipelines, Piping and Process Equipment
SAES-L-136 : Pipe Selection and Restrictions
SAES-L-140 : Thermal Expansion Relief in Piping
SAES-L-150 : Pressure Testing of Plant Piping and Pipelines
SAES-L-310 : Design of Plant Piping
SAES-L-350 : Construction of Plant Piping
SAES-L-410 : Design of Pipelines
SAES-L-420 : Scraper Trap Station and Appurtenances
SAES-L-440 : Anchors for Buried Pipelines
SAES-L-450 : Construction of On-Land and Near-Shore Pipelines
SAES-L-460 : Pipeline Crossings Under Roads and Railroads
SAES-L-610 : Nonmetallic Piping
SAES-L-810 : Design of Piping on Offshore Structures
SAES-L-850 : Design of Submarine Pipelines and Risers
SAES-M-001 : Structural Design Criteria for Non-Building Structures
SAES-M-005 : Design and Construction of Fixed Offshore Platforms
SAES-M-006 : Saudi Aramco Security and General Purpose Fencing
SAES-M-009 : Design Criteria for Blast Resistant Buildings
SAES-M-100 : Saudi Aramco Building Code
SAES-N-001 : Basic Criteria, Industrial Insulation
SAES-N-004 : Design and Installation of Building Thermal Insulation
SAES-N-100 : Refractory Systems
SAES-N-110 : Installation Requirements – Castable Refractories
SAES-N-120 : Installation Requirements – Extreme Erosion Resistant Refractories
SAES-N-130 : Installation Requirements – Fireclay Bricks
SAES-N-140 : Installation Requirements – Refractory Ceramic Fiber
SAES-O-100 : General Requirements Safety and Security
SAES-O-101 : Standard Security Fence – Category I
SAES-O-102 : Category II Fence
SAES-O-103 : Category III Fence
SAES-O-104 : Category III Fence, Alternative
SAES-O-105 : Gates in Perimeter Fences
SAES-O-105A : Gates in Woven Wire Fabric Fences
SAES-O-106 : Barbed S Wire Concertina
SAES-O-107 : Security and Emergency Exit Doors
SAES-O-108 : Locks Used on Security Doors, Perimeter Fences and Emergency Exits
SAES-O-109 : Buildings Housing Sensitive or Vital Equipment
SAES-O-110 : Protection of Vital Equipment
SAES-O-111 : Power Supplies
SAES-O-112 : Communications
SAES-O-113 : Security Lighting System
SAES-O-114 : Check Point Lighting
SAES-O-115 : Intruder Detection Systems
SAES-O-116 : Automatic Control of Entry
SAES-O-117 : Gate House and Vehicle Lock
SAES-O-118 : Fire Fighting Equipments
SAES-O-119 : Work Permit Procedures
SAES-O-120 : Expanded Steel Mesh
SAES-O-121 : Protection of Diesel Engines
SAES-O-122 : Gasoline Filling Stations
SAES-O-123 : Automatic Control of Entry
SAES-O-124 : Turnstiles for Entry Control
SAES-O-125 : Internal Tank Cleaning
SAES-O-126 : Blast Resistant Control Buildings
SAES-O-127 : Tank Spacing – Dikes and Drainage
SAES-O-128 : Offshore Requirements
SAES-P-100 : Basic Power System Design Criteria
SAES-P-101 : Regulated Vendors List for Electrical Equipment
SAES-P-103 : UPS and DC Systems
SAES-P-104 : Wiring Methods and Materials
SAES-P-107 : Overhead Distribution Systems
SAES-P-111 : Grounding
SAES-P-113 : Motors and Generators

Download SAES Index xlsx file below

SAES-P-114 : Power System and Equipment Protection
SAES-P-116 : Switchgear and Control Equipment
SAES-P-119 : Onshore Substations
SAES-P-121 : Transformers and Reactors
SAES-P-123 : Lighting
SAES-P-126 : Power Monitoring System
SAES-Q-001 : Criteria for Design and Construction of Concrete Structures
SAES-Q-004 : Installation of Piles and Conductors for Offshore Structures
SAES-Q-005 : Concrete Foundations
SAES-Q-006 : Asphalt Concrete Paving
SAES-Q-007 : Foundations and Supporting Structures for Heavy Machinery
SAES-Q-009 : Concrete Retaining Walls
SAES-Q-010 : Cement Based, Non-Shrink Grout for Structural and Equipment Grouting
SAES-Q-011 : Epoxy Grout for Machinery Support
SAES-Q-012 : Criteria for Design and Construction of Precast and Prestressed Concrete Structures
SAES-S-007 : Solid Waste Landfill Standard
SAES-S-010 : Sanitary Sewers
SAES-S-020 : Industrial Drainage and Sewers
SAES-S-030 : Storm Water Drainage Systems
SAES-S-040 : Saudi Aramco Water Systems
SAES-S-050 : Sprinkler and Standpipe Systems in Buildings
SAES-S-060 : Saudi Aramco Plumbing Code
SAES-S-070 : Installation of Utility Piping Systems
SAES-T-000 : Telecommunications Standards Introduction and Indices
SAES-T-018 : Telecommunications – Symbols, Abbreviations and Definitions
SAES-T-151 : Communication D.C. Power System
SAES-T-243 : Telecommunications: Protection Equipment in Communication Buildings
SAES-T-360 : Synchronous Digital Hierarchy Transmission Systems
SAES-T-435 : Telecommunications: Station Protection
SAES-T-481 : Powered in Plant Communications
SAES-T-492 : VHF/UHF Land-Mobile and Fixed Radio Communication
SAES-T-500 : Central Office (CO) Digital Telephone Switching Systems
SAES-T-521 : Circuit Measuring Techniques
SAES-T-556 : Circuit Quality and Performance
SAES-T-603 : Telecommunications – Safeguards and Warning Devices
SAES-T-604 : Communications Plant – Clearances/Separations – Aerial
SAES-T-621 : Communications Pole Lines
SAES-T-624 : Telecommunications Outside Plant – Fiber Optics
SAES-T-625 : Inter and Intra Building Fiber Optic Communication Cables
SAES-T-628 : Telecommunications – Underground Cable
SAES-T-629 : Telecommunications Buried Cable and Wire
SAES-T-631 : Communications Cable Terminals
SAES-T-632 : Communications Cable Splicing
SAES-T-633 : Communications Splice Closures
SAES-T-634 : Telecommunications – Cable Testing and Acceptance
SAES-T-637 : Communications Cable Pressure Testing
SAES-T-744 : Design Criteria/Installation of Communication Towers
SAES-T-795 : Communications Facility Grounding Systems
SAES-T-820 : Narrow-band Videoconferencing Systems
SAES-T-830 : Voice Frequency Loop Transmission Objectives
SAES-T-883 : Telecommunications – Inductive Coordination
SAES-T-887 : Telecommunications: Electrical Coordination – Protection at Power Plants and Radio Stations
SAES-T-903 : Outside Plant Electrical Protection and Grounding
SAES-T-906 : Telecommunications – Structural Coordination
SAES-T-909 : Communications Pole Lines
SAES-T-911 : Telecommunication Conduit System Design
SAES-T-912 : Communications Feeder Cable
SAES-T-914 : Telecommunications Distribution Cable
SAES-T-916 : Telecommunications Building Cable Systems
SAES-T-920 : Telecommunications Cable Information
SAES-T-928 : Telecommunications – Outside Plant Direct Burial
SAES-T-938 : Telecommunications: Outside Plant Systems – Design
SAES-W-010 : Welding Requirements for Pressure Vessels
SAES-W-011 : Welding Requirements for On-Plot Piping
SAES-W-012 : Welding Requirements for Pipelines
SAES-W-013 : Welding Requirements for Offshore Structures
SAES-W-014 : Weld Overlays and Welding of Clad Materials
SAES-W-015 : Strip Lining Application
SAES-W-016 : Welding of Special Corrosion-Resistant Materials
SAES-W-017 : Welding Requirements for API Tanks
SAES-X-300 : Cathodic Protection of Marine Structures
SAES-X-400 : Cathodic Protection of Buried Pipelines
SAES-X-500 : Cathodic Protection of Vessel and Tank Internals
SAES-X-600 : Cathodic Protection of Plant Facilities
SAES-X-700 : Cathodic Protection of Onshore Well Casings
SAES-X-800 : Cathodic Protection for Existing Reinforced Concrete Structures
SAES-Y-101 : Custody Metering of Hydrocarbon Gases
SAES-Y-103 : Custody Metering of Hydrocarbon Liquids
SAES-Z-001 : Process Control Systems
SAES-Z-002 : Technically Accepted Process Automation Systems
SAES-Z-003 : Pipeline Leak Detection Systems
SAES-Z-010 : Process Automation Networks Connectivity