Method Statement for Electrical Power & Control Cable Pulling Word Format Free (DOC)
- File Name: WMS – ELECTRICAL POWER & CONTROL CABLE PULLING
- File Type: MS Word
- File Size: 217 KB
This Ms-Word provides a method statement for Power & Control Cable Pulling at a residential complex, oil & Gas project in Saudi Aramco. It outlines delivery and storage procedures for cable materials, as well as inspection processes. The installation procedure specifies initial checks of the containment system and cable schedules. It describes safe cable pulling and laying in the trays, proper termination in panels with lugs and glands, tagging, and testing before energization. Safety precautions like protective gear and a clean worksite are also mandated.
To ensure that cable pulling is performed safely, efficiently and in accordance with good working practice, as per Saudi Aramco Job Specifications. This method statement is intended to provide general application guidance and establish controls during preparation and installation.
This Method of Statement is applicable to all cable pulling activities which are to be performed on the SAUDI ARAMCO PROJECT.
INSPECTION & QUALITY RECORDS: All stages of work shall be inspected and tested in accordance with the Approved Project Quality Control Inspection Plan.
FAQ:
Understanding the Basics of Cable Pulling:
Cable pulling is exactly you think it is. It is the installation of a cable from one point to another, often through open trenches and ducts, to connect a power supply from the mains to a where new electrical supply is required.
Power cables transfer energy from a source to equipment:
Control cables send signals to control the functioning of equipment. Products include cables that range from 601 to 15 kV and 15.1 kV and over as well as paper power cable, portable power cable, and welding cable.
What is the method of statement cable pulling?
The cable pulling safe work method statement is an assessment of risk following the identification of hazards in connection with the work task of electrical cable pulling and the subsequent implementation of controls to manage the risks.
What is the standard for cable pulling?
The maximum nominal pulling tension that a single-core cable can withstand is rated to be 22,250N. Due to the unevenly distributed forces of multicore cables when bending, this rating becomes 44,500N for a three-core cable [ref…].
