Impulse Tubing Installation References
REFERENCES
1 BRITISH STANDARDS INSTITUTION. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Part 1: General principles and requirements. BS EN ISO 5167-1:2003.
2 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. Fluid flow in closed conduits – Connections for pressure signal transmissions between primary and secondary elements. ISO 2186: 1973.
3 BARTON, N. A Review of Steam Flowmetering Technology. Report 2004/69 for National Measurement System Directorate, Department of Trade and Industry on FEUS04. East Kilbride, Glasgow: National Engineering Laboratory, October 2004.
4 MOTTRAM, R.C., OWEN, I. and TURNER, J.T. Wet steam/wet gas flow measurement. Flow Measurement and Instrumentation Consortium Report No 13, May 1991.
5 SPARKS, C. R. The effects of gage lines on pressure measurement accuracy. SwRI Report No. 84-6A. San Antonio, Texas: Southwest Research Institute, May 1984.
6 BOTROS, K. K., JUNGOWSKI, W. M., and PETELA, G. Gauge line effects and DP transmitter response to flow pulsation through orifice plate. Flow Measurement and Instrumentation, 3 (3), pp. 130-144, 1992.
7 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. Measurement of fluid flow in closed conduits – Guidelines on the effects of flow pulsations on flowmeasurement instruments. ISO/TR 3313: 1998.
8 DAIBER, J. and HUGHES, A. Freeze Protecting Your Power Generation Assets O’Brien Corporation, (http://www.babcockpower.com/pdf/vpi-14.pdf).
9 MENEZES, M. Improving plant safety & availability through advanced measurement diagnostics. Originally presented to ISA/2000 (August), New Orleans, available from
http://www.rosemount.com/support/papers/diagnost0810.doc.
10 SZANYI, R., RATERMAN, M. and ERYUREK, E. Diagnostic capabilities of FOUNDATION fieldbus pressure transmitters. Hydrocarbon Processing, pp. 53 – 59, April 2003.
11 HARROLD, D. Protect process instruments to ensure performance. Control Engineering, July 1, 1999.
12 HALL, A. R. W. and READER-HARRIS, M. J. Venturi meters in multiphase flow. Report 286/99 on MSDC57. East Kilbride, Glasgow: National Engineering Laboratory, September 1997.
